3
Contents
Installation Tools
The following is a list of suggested tools needed for installation:
Installation Considerations
This section focuses on some considerations for installing your Yamaha
YXZ rear speaker kit. This manual will illustrate the installation process
with a 2017 Yamaha YXZ1000R SS with a RFYXZ-RSW16 wiring kit.
If you feel unsure about installing this system yourself, have it installed by
a qualified technician.
When drilling holes, make sure what is on the
other side. Be sure that any electrical, fuel lines
or any other important components are free
and clear from the area.
Before installation, disconnect the battery
negative (-) terminal to prevent damage to the
unit, fire and/or possible injury.
Before beginning any installation, follow these
simple rules:
• Be sure to carefully read and understand the instructions before
attempting to install this wiring kit.
• Consult your UTV’s service manual for model specific information.
Models may differ from year to year depending on factory options and
aftermarket accessories added.
• This wiring kit is specifically designed to work with Rockford Fosgate’s
PM and RM series of mini wake cans.
• With the addition of an amplifier or source unit, be sure that your
current charging system is in proper working order.
• Visit
rockfordfosgate.com
for more comprehensive product
information.
• Visit our
YouTube
channel for comprehensive installation videos.
• Drill
• Drill Bits (1/8”, 5/16” & 1/2”)
• Small Flat Blade Screwdriver
• Ratchet
• 10mm Socket
• 10 mm Wrench
• 4mm Allen Wrench
• Wire Cutters
• Pencil or Marker
• (2) Front Speaker Enclosures
• (2) Wire Harnesses
• Mounting Hardware
• Plastic Wire Tie Wraps
• Foam Tape
Installation
Installation Videos
