Rockford Fosgate RFX8620M, Installation & Operation Manual, Page: 8 / 44

8
O
PERATION
– CD P
LAYER
Magazine Eject
1. Slide door open in the direction shown.
2. Press the EJECT button to release the disc
magazine from the CD changer.
NOTE : If the front eject button does not work, a
manual eject lever is visible through a hole
at the bottom of the unit. Move the lever in
the direction shown to eject magazine.
Loading Disc to the Magazine
1. Pull out the desired disc tray number from the
magazine.
2. Place the disc into the magazine, label side up.
3. Push the disc tray back into the magazine.
NOTE : Discs numbers are arranged from the bottom
up.
Loading the Magazine to the CD Changer
The INSERT IN THIS DIRECTION arrow indicates
the proper direction that the magazine should be
loaded into the CD changer.
CAUTION : Avoid installing or leaving
the magazine where it would
be subject to high
temperatures such as from
direct sunlight or from hot air
from the heater. Doing so will damage the unit.
6
5
4
3
2
1
PUSH
!
Eject
Manual Eject
Label
Side Up
Slide Door
S
PECIFICATIONS
General Model RFX8620M
Operating Voltage 13.8V DC
Compatible Discs 5" (12cm)
Frequency Response 20-20kHz
Signal-to-Noise Ratio 90dB
Channel Separation 70dB
T.H.D. 0.03dB
Output Power 700 mV
Overall Dimensions Height: 2-1/2" (63mm)
Width: 10" (254mm)
Depth: 6-3/16" (157mm)
Weight (Mass) 3.13lbs (1.9kg)
Specifications subject to change without notice