P7
2.Sirius ID and Activate Sirius service
After system is turned on, press the MODE button to enter the SIRIUS mode.
The system will display a "SIRIUS" logo on the LCD screen.
Until you subscribe and activate the SIRIUS service, you can only access
channel 0 (the SIRIUS ID channel) and 184 (Preview Channel).
Tune to Channel 0 to display your radio's unique 12-digit SIRIUS ID number (SID).
This number is also available on the back of SIRIUS Tuner SCC1. Write down
this number and call 1-888-539-SIRIUS (1-888-539-7474) with your credit card
handy to activate SIRIUS service.
You may go to website https://activate.siriusradio.com// to activate the service.
If you do not subscribe the full service, the unsubscribed channel will display
"CALL 888-539-SIRIUS to subscribe"when tuned.
SIRIUS OPERATION
3. Preset Stations
The unit has total 18 preset stations in SIRIUS Mode. Use BAND button to switch
between SR1, SR2, and SR3. Each band has 6 preset stations.
Short press the Preset 1~6 button to listen to the preset stations.
Long press the preset 1~6 button to store current station to preset memory.
4. Select channels by category
Short press MENU button to turn on/off the category mode. A "CAT" icon in the
LCD will indicate the Category mode is on. When Category mode is on, long
press "SEEK +/-" to switch between the categories, such as POP,ROCK,
COUNTRY, etc. And you can switch channels in selected category by short
pressing "SEEK+/- " button. The category mode will not time out unless you
turn off this mode by short press MENU button again.
5. Input channel directly.
Short press the AS/PS key to enter the direct input mode. The LCD will display:
"CH X X XX " Press Preset 1 repeatedly to select the first digit of channel number
(the first digit changes incrementally from 0, 1, 2).
Press Preset 2 repeatedly to select the second digit of channel number(the second
digit incrementally from 0, 1, 2, ... To 9)
Press Preset 3 repeatedly to select the third digit of the channel number (the third
digit changes incrementally from 0, 1, 2, ... To 9).
When 3 digits are selected, press "SEL" button to enter the desired channel.
P10
Listening to the radio
Press the MODE (4) button and select the radio mode, the frequency appears
in the display.
Press the BAND (8) button and select the radio band FM1~FM2~FM3~AM1~AM2.
Tuning
There are 3 types of tuning mode available: SEEK tuning, MANUAL tuning and
Preset
stations.
Auto Seek a Station
Press the BAND (8) button and select the desired band (FM or AM).
Press or to start to seek a station.
Manual Tuning
Press the or button longer than 2s,
change
.
will
to manual tuning mode
Storing a Station
Select a band (if needed), then select a station.
Press and hold a Preset button 1-6 for more than 2 seconds, the current station
will be stored to the number.
Automatic Tuning Control (SCAN) (9)
In radio mode, press SCAN button to scan stations, the unit will pause for 5 seconds
at each strong radio station. At the desired station press the SCAN again to stop
scanning.
RADIO OPERATION
Radio Operation
A/PS(7)
Short
it pauses for 5 seconds at each preset station.
Long press A/PS button, the unit will search six strong stations and automatically
store them on buttons 1-6.
press A/PS button, the unit will scan stored stations in the current band,
