11
O
PERATION
– B
ASIC
•
INI VOL 15
— Sets the maximum Initial Volume when the unit turns on. Initial Volume sets
point of maximum volume when the unit is turned on. If the volume setting was lower than the
initial volume setting when the unit is turned off, then the lower volume will be used at turn on.
If the volume setting was higher than the initial volume setting, then the initial volume setting is
used at turn on. This feature prevents accidental high volume turn on as well as allows high
volume settings to be retained in case another preamplifier is the system’s main volume control.
CLOCK OPERATION
Setting the Clock Hours
1. Press and hold the DISP button for 1 second until
the hour flashes.
2. Press
DIR / Button
(SEEK
or
)
to
set the hour.
Setting the Clock Minutes
1. Press and the DISP button a second time and the minutes will flash.
2. Press DIR
/
Button (SEEK
or
) to set the minutes.
Your settings will be saved after the clock has flashed for 5 seconds.
NOTE
: When the radio is off (sleep mode) the clock will be displayed.
MODE SELECTION
Press the MODE button repeatedly to cycle through the following
modes:
•
CDP PLAY
— Enables CD Player if a CD is inserted.
•
FM1>FM2>AM
— Enables the Tuner.
MUTE
1. Press the MUTE (7) button to dampen the volume.
2. Press the MUTE (7) button a second time to revert the audio to the
previous level.
NOTE
: The panel will display MUTE until the function is canceled.
PUNCH
The Punch button enables the bass and treble response of the
audio output to be boosted for all listening levels.
1. Press the PUNCH (0) button to enable the Punch feature.
2. Press the PUNCH (0) button again to disable the Punch
feature.
NOTE
: The panel will display "Punch" when the Punch
feature is on.
MODE
MENU
VOL
PUSH
DIR
DIR
DISP
Remote
Remote
BAND
MODE
MENU
VOL
ENTER
PUSH
DIR
DIR
CO
®
DISP
S
6
7
8
T-ACC
ROOT
MUTE
LO/DX
7
8
9
0
T-ACC
X 9000
MUTE
LO/DX
AS
PUNCH
OPEN
