3
Installation Considerations
This section focuses on some considerations for installing your Polaris
RANGER amplifier installation kit. This kit is desigend to work in
conjuction with Rockford’s other RANGER specific audio kits and parts.
If you feel unsure about installing this system yourself, have it installed
by a qualified technician.
When drilling holes, make sure what is on the other side. Be sure that
any electrical, fuel lines or any other important components are free
and clear from the area.
Before installation, disconnect the battery
negative (-) terminal to prevent damage to
the unit, fire and/or possible injury.
Before beginning any installation, follow
these simple rules:
Be sure to carefully read and understand the
instructions before attempting to install this
wiring kit.
• Consult your UTV’s service manual for model specific information.
Models may differ from year to year depending on factory options
and aftermarket accessories added.
• This amplifier installation kit is specifically designed to work with
Rockford Fosgate’s compact chassis amplifiers.
• With the addition of an amplifier or source unit, be sure that your
current charging system is in proper working order.
• Visit
rockfordfosgate.com
for more comprehensive product
information.
• Visit our
YouTube
channel for comprehensive installation videos
demonstrating complete installation guides and install tips.
Installation
Applicable Models:
Full Size Polaris RANGER 900/1000/ 900 Crew/1000 Crew
This amplifier installation kit is designed to work with Rockford
Fosgate’s RANGER specific enclosures and dash kits. The amp kit can be
installed in both Crew and non-crew models under the dash above the
steering column.
Step 1. Remove the top dash panel.
Step 2. Loosen the (2) nuts on the steering column support using a 15
mm wrench and socket.
NOTE: You do not need to completely remove the nuts.
Step 3. To mount the bracket, line up the (2) notches on the bracket
and slide them over the bolts that were just loosened. The tab
faces toward outside of the vehicle.
Step 4. Plug the input, output and power/ground harnesses into the
amplifier before attaching to the bracket.
Step 5. Mount the amplifier to the bracket using the (2) supplied
screws.
Step 6. Connect the power and ground to the battery terminals.
Step 7. Connect input connector(s) from the radio.
