PUNCH EQ
MIN
MAX
LEVEL
MIN
MAX
FREQ. Hz
50
120
PWR /
PRT
PHASE
AUTO TURN ON
REM - DC - AUDIO
0º - 180º
PS-8
B+
REM
GND
POWER
INPUT LEVEL
LOW - HIGH
REMOTE
PUNCH LEVEL
SPEAKERS
R-
L-
R+
L+
4
Design Features
illus.-2.1
Power Connector
The power connector allows for quick connec-
tion and disconnection of the amplifier’s Re-
mote, power and ground source. The power and
ground are set-screw wire connectors and will
accommodate 4 AWG. The remote is a set-screw
wire connector and will accommodate 8 AWG.
Phase Switch
Allows you to select the output phase of
the amplifier between 0° and 180°.
Input Level
Set the Input Level switch to match the outputs of your
source unit.(LO - RCA or HI - Speaker Level)
Auto Turn On
Three different automatic turn-on modes can be se-
lected; REM(+12V), DC Offset and Audio.
Variable Crossover
Is a built-in 12dB/octave Butterworth filter with
a crossover point variable from 50Hz to 120Hz.
Punch EQ
This is an adjustable Bass control adjustment vari-
able from 0dB to +12dB @ 45Hz.
Power/Protect LED
Power LED illuminates green
when the unit is turned on.
Protect LED illuminates red
if a short circuit or to low of
an impedance is detected at
the speaker connections.
The amplifier will automati-
cally shut down if this oc-
curs.
Remote Punch Level Control
When connected, the “Level Control” is linked
and allows you to remotely control the output
level of the amplifier from the dash or center
console.
Audio Input
The RCA/Speaker Harness utilizes either speaker
level (high-level) or RCA (low-level) inputs.
Input Level Control
The input level control is used to match the
output of the audio source.
