– 28 –
500.
2
S
PECIFICATIONS
Dynamic Power Rating (IHF-202 Standard) - Measured at 14.4V
Per channel into a 4
Ω
load
450 Watts
Per channel into a 2
Ω
load
730 Watts
Bridged into a 4
Ω
load
1460 Watts*
Continuous Power Rating (Competition Standard) - Measured at 13.8 Battery Volts
RMS continuous power
per channel
, both channels driven
into a 4
Ω
load from 20 to 20,000Hz with less than
0.05% THD (Total Harmonic Distortion)
250 Watts
RMS continuous power
per channel
, both channels driven
into a
2
Ω
load from 20-20,000Hz, with less than 0.10% THD
500 Watts
RMS continuous power
mono
, into
4
Ω
load
from 20-20,000Hz, with less than 0.10% THD
1000 Watts
Common Mode Rejection Ratio (CMRR):
Typically 40dB
Signal-to-Noise Ratio:
>100dB (A-weighted)
Frequency Response:
20Hz-20,000Hz
±
0.5dB
Bandwidth:
10Hz–250kHz
±
3dB
Damping Factor @ 4
Ω
(at output connector):
>200
Slew Rate:
50V
µ
s
IM Distortion (IHF):
<0.05%
Input Impedance:
20k Ohms
Source Unit Compatibility (+15dB gain overlap):
34V max.
Input Sensitivity (+0dB gain overlap):
Variable from 350mV to 6V
Pass-Thru Output:
Unity Gain
B+ Fuse Size: (External to amplifier)
100 Amp or two 50 Amp
Fuse Type:
(1) ANL / (2) AGU
Crossover Slope:
12dB or 24dB/octave Butterworth
Factory Crossover Frequency:
80Hz (0.047
µ
f)
Factory Default Crossover Setting:
Full Range
Dimensions: (including end caps)
9-5/8"W x 18-9/32"L x 2-5/8"H
(24.4cm) x (46.43cm) x (6.6cm)
Specifications subject to change without notice.
*This is the calculated Dynamic Power Rating. Actual output power exceeded the input capability of the PowerCube.
