2-Channel Punch Amplifier
Punch 45.2
Specification
Reference
Sheet
•
Gold-Plated RCA Input Jacks
– Maintains signal quality by resisting
corrosion
•
Input Sensitivity Control
– Level control can be adjusted to match
output levels from a variety of source units
•
Gold-Plated Power/Speaker Barrier Strip
– Screw terminals
accept #10 spade lugs or bare wire sized from 10 to 18 AWG
•
Crossover Switch
– Crossover can be set for low-pass operation or full
range
•
Bass EQ
– The Bass EQ allows a narrow band adjustment of up to +18dB
centered at 45Hz. The bass boost can be bypassed by turning the control to
its minimum or counterclockwise position
•
LED Power Indicator
– Visual indicator illuminates when amplifier is
turned on
W
ARRANTY
•
3 Years
F
EATURES
T
ECHNICAL
F
EATURES
•
Trans•ana
– Sound quality topology that sends an extended bandwidth
accurately to the output stages of the amplifier
•
TOPAZ
– Eliminates troublesome ground loop noise between the source
and amplifier
•
NOMAD
– Extremely fast protection system that always protects the
amplifier and never degrades the sound
•
MOSFET Devices
– Power supply and output devices that have high
thermal stability, fast switching speed, low output impedance, and wide
bandwidth linearity
•
DSM (Discrete Surface Mount) Technology
– Fewer
connections, improved reliability, shorter signal paths, superior signal-to-
noise ratio and awesome sonic performance
D
ESIGN
F
EATURES
•
Diecast Heatsink
–
Dissipates heat generated by the amplifier’s
circuitry
S
PECIFICATIONS
RMS Continuous Power @ 14.4V (Competition Standard)
Stereo into a 4
Ω
load (20Hz-20kHz, <0.05% THD) ......... 22.5x2
Stereo into a 2
Ω
load (20Hz-20kHz, <0.10% THD) ............ 45x2
Bridged into a 4
Ω
load (20Hz-20kHz, <0.10% THD) .......... 90x1
Dynamic Power @ 14.4V (IHF Standard)
Stereo into a 4
Ω
load (20Hz-20kHz, 1% THD) ................... 50x2
Stereo into a 2
Ω
load (20Hz-20kHz, 1% THD) ................... 85x2
Bridged into a 4
Ω
load (20Hz-20kHz, 1% THD) ............... 170x1
Signal-to-Noise Ratio ................................ >100dB (A-weighted)
Frequency Response .................................. 20Hz-20kHz
±
0.5dB
Bandwidth .............................................. 10Hz-250kHz
±
3.0dB
Damping Factor @ 4
Ω
...................... >200 (at output connector)
Slew Rate .................................................................... 30v/
µ
s
IM Distortion (IHF) ..................................................... <0.05%
Input Impedance ............................................................ 20k
Ω
Factory Default Crossover ............................ 80Hz low-pass fixed
Crossover Slope ................................... 12dB/octave Butterworth
Source Unit Compatibility (+15dB gain overlap) .......... 20V max.
Input Sensitivity (0dB gain overlap) .................... 200mV to 3.5V
Operating Voltage ........................................ +9V to +15.4V DC
External Battery Fuse ................................................ 20A (ATC)
Standby Current
700mA
Dimensions ...................................... 2
5
⁄
8
"H x 9
5
⁄
8
"W x 10
9
⁄
32
"L
(6.6cm x 24.4cm x 26.1cm)
Weight ........................................................ 5.7 lbs. (2.58kg)
®
®
Specifications subject to change without notice
A
CCESSORY
P
ACK
(1) Punch Verification Certificate
(4) Amplifier Mounting Screws (#8 x 3/4” Phillips)
(1) 9/64” Allen Wrench
(4) 9/64” End Cap Mounting Screws
(1) ATC In-line Fuseholder
(1) ATC 20 Amp Fuse
– 2 –
