– 5 –
I
NSTALLATION
C
ONSIDERATIONS
This section focuses on some of the vehicle considerations for installing your new
PA2. Pre-planning your system layout and best wiring routes will save
installation time. When deciding how to lay out your new system, be sure that
each component will be easily accessible for making adjustments.
Before beginning any installation, be sure to follow these simple rules:
1. Be sure to carefully read and understand the instructions before attempting
to install the PA2.
2.
For safety
, disconnect the negative lead from the battery prior to beginning
the installation.
3. For easier assembly, we suggest you run all wires prior to mounting your PA2
in place.
4. Route all of the RCA cables close together and away from any high current
wires.
5. Use high quality connectors for a reliable installation and to minimize signal
or power loss.
6.
Think before you drill!
Be careful not to cut or drill into gas tanks, fuel lines,
brake or hydraulic lines, vacuum lines or electrical wiring when working on
any vehicle.
7. Never run wires underneath the vehicle. Running the wires inside the vehicle
provides the best protection.
8. Avoid running wires over or through sharp edges. Use rubber or plastic
grommets to protect any wires routed through metal, especially the firewall.
9.
ALWAYS
protect the battery and electrical system from damage with proper
fusing. Install the appropriate fuseholder and fuse on the +12V power wire
within 18” (45.7 cm) of the battery terminal.
10. When grounding to the chassis of the vehicle, scrape all paint from the metal
to ensure a good, clean ground connection. Grounding connections should
be as short as possible and always be connected to metal that is welded to
the main body, or chassis, of the vehicle.
The following is a list of tools you will need for installing the PA2.
Red power wire
Wire strippers
Blue remote turn-on wire
Wire cutters
Black grounding wire
Voltmeter
Electric hand drill w/assorted bits
Jeweler's slotted screwdriver
Battery post wrench
#2 screwdriver
Summary of Contents for PA2
Page 1: ... c a r a u d i o fanatics for 1 2 DIn preamplifier pa2 ...
Page 2: ......
Page 22: ... 18 I N T E R N A T I O N A L I N F O R M A T I O N ...
Page 35: ......
