– 66 –
ERROR 6
(Transverse Error)
Transverse motor or
switch is defective.
Traverse area
damaged
Check CD mechanism motor,
switch and transverse area.
SYMPTOM
DIAGNOSIS
REMEDY
Disc will not load
into Source Unit
(also see error codes)
Voltage applied to Red
and Yellow wires is not
between 10.8 and 16
volts or there is no
voltage present
Check battery, fuses and
connections and repair or replace
as necessary. If voltage is above
+16 volts, have the electrical
system inspected by an autho-
rized car service center
Disc will not eject
(also see error codes)
Voltage applied to
Yellow wire is not
between 10.8 and 16
volts or there is no
voltage present
Check battery, fuses and
connections and repair or replace
as necessary. If voltage is above
+16 volts, have the electrical
system inspected by an autho-
rized car service center
ERROR 1
(Initialize Error)
No initialization
Press the reset button
Mechanism is jammed
and loading motor (or
driving circuit) is
defective
Repair the mechanism and
loading motor (or driving circuit)
ERROR 3
(Loading Error)
Foreign objects are
preventing the disc
from loading
Check CDP mechanism load area
by removing faceplate and repair
as necessary
Loading area in
mechanism and load-
ing motor (or driving
circuit) is defective
Repair the mechanism and load-
ing motor (or driving circuit)
ERROR 4
(Eject Error)
Foreign objects are
preventing the disc
from ejecting
Check CDP mechanism eject area
by removing faceplate and repair
as necessary
Ejecting area in mech-
anism and ejecting
motor (or driving cir-
cuit) is defective
Repair the mechanism and load-
ing motor (or driving circuit)
All manuals and user guides at all-guides.com
