8
Need help? Call 800-620-2790
RF-TVMLPT02V2 TV Wall Mount
STEP 3 - Determine whether your TV has a flat back or an irregular or obstructed
back
1
Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from damages
and scratches.
2
If your TV has a table-top stand attached, remove the stand. See the documentation that came with your TV
for instructions.
3
Temporarily lay the TV brackets (
B
and
C
) on the back of your TV.
4
Align the screw holes in the TV brackets with the mounting screw holes on your TV.
5
Identify which type of back your TV may have:
•
Flat back
: The brackets lay flush against the back of your TV and do not block any jacks. You do not
need spacers when assembling the wall mount.
•
Obstructed back
: The brackets block any of the jacks on the back of your TV. You will need spacers
when assembling the wall mount.
•
Irregularly-shaped back
: There is a gap between the bracket and some part of the back of your TV.
You will need spacers when assembling the wall mount.
6
Remove the brackets.
RF-TVMLPT02V2_13-0194_MAN_V2_EN - GIFs.fm Page 8 Thursday, March 14, 2013 12:01 PM
