V1 ENGLISH 14-0334
Using your HD Extender
1
Place two AAA batteries (included) into the remote control.
2
Press (power) on the Transmitter and Receiver to turn them on. The Sync indicators
blink while establishing a connection over the power line. After connecting, the
indicators blink slower (good connection) or light solid (perfect connection). You can
watch video and hear audio through your TV.
3
Make sure that your video device is turned on, then press the
SOURCE 1
or
SOURCE 2
button on the remote control or the Receiver and Transmitter to select the
source you want to view.
4
Turn on your TV and set it to the correct HDMI input.
Troubleshooting
Problem:
The (power) indicator
does not turn on
No picture on your TV or
projector
Intermittent or no sound
The IR emitter does not
control the source device
Solution:
• Make sure that the AC power cords to the Transmitter and Receiver are plugged in.
• Make sure that the AC power outlet is working.
• Make sure that the connections are correct and secure between the Transmitter
input and your HD device output.
• Make sure that an HDMI input has been selected as the source on your TV or
projector.
• Make sure that the (power) indicator is on and the SOURCE indicator shows the
correct input.
• Make sure that you are connected directly into the wall and not into a surge
protector. Some surge protectors can interfere with powerline networking and
could degrade performance.
• Make sure that your TV’s volume is turned up and not set to MUTE.
• Reconnect the HDMI cable to the TV first. If you still do not have audio, power cycle
both the Transmitter and Receiver units by unplugging the power cords for five
seconds and then plugging them back in.
• Make sure that the IR emitter is aligned with the IR sensor on the source device.
Specifications
• Video CODEC: H.264 video encode and decode
• Video Resolution: Support up to 1920 x 1080 @ 60p
• Digital audio: Dual channel, Linear PCM, 44.1 KHz, 48KHz
• Power Line Link speed: 500 Mbps SmartLink PLC technology
Legal notices
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and Receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
Receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Warnings
:
Changes or modifications not expressly approved by the party responsible for compliance
could void the user‘s authority to operate the equipment.
IC Statement
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference that
may cause undesired operation of the device.
This equipment complies with Industry Canada radiation exposure limits set forth for an
uncontrolled environment.
One-year limited warranty
Visit www.rocketfishproducts.com for details.
Need additional help?
Check out our online
community forum
at www.rocketfishproducts.com for helpful
information from other Rocketfish HD Extender owners. You can also visit the product page
on www.rocketfishproducts.com for FAQs.
We’re here for you:
For customer service, call 1-800-620-2790 (U.S. and Canada) or 01-800-926-3010 (Mexico)
www.rocketfishproducts.com
ROCKETFISH is a registered trademark of BBY Solutions, Inc.
Registered in some countries.
Distributed by Best Buy Purchasing, LLC, 7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2014 BBY Solutions, Inc. All Rights Reserved.
Features
Transmitter
• Front panel
• Back panel
Receiver
• Front panel
• Back panel
Remote control
Source indicators
Power indicator
Source
selector
button
Power
button
Sync
indicator
RESET
button
HDMI
INPUTS
HDMI
OUT
SERVICE
port
AC
input
IR OUT
jack
Source indicators
Power indicator
Source
selector
button
Power
button
Sync
indicator
RESET
button
HDMI
OUT
SERVICE
port
AC
input
IR IN
jack
(power)
Source 1
Source 2
