ENGLISH 11-1170
HDMI
version
1.4A
Video amplifier bandwidth
225 MHz / 6.75 Gbps
Video Resolution
480i to 1080p from source device
HDMI HDCP compliant
Pass HDCP data between source and monitor
Power consumption
5 W (maximum)
Power supply
5V DC/1000 mA
Dimensions
2.8 x 2.9 x 1 in. (147 x 73.5 x 26 mm)
Shipping weight
.82 lb. (.372 kg)
Legal notices
HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other countries.
Dolby is a registered trademark of Dolby Laboratories.
DTS is a registered trademark & the DTS logos and Symbol are trademarks of DTS, Inc.
FCC
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, maybe cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Warning: Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
1-year limited warranty
Visit www.rocketfishproducts.com for details.
Contact Rocketfish:
www.rocketfishproducts.com
For customer service, call 800-620-2790 (U.S./Canada markets)
© 2011 BBY Solutions, Inc., All Rights Reserved.
Distributed by Best Buy Purchasing, LLC 7601 Penn Avenue South, Richfield, MN USA 55423-3645
ROCKETFISH is a trademark of BBY Solutions, Inc. All other products and brand names are
trademarks of their respective owners.
Specifications
1
Make sure your switcher is plugged in and turned on.
2 Make sure that all the devices are plugged in and turned on.
3 Make sure all cables are securely connected to the device
and the switcher.
1
Make sure that your DVD movie is original. HDMI includes
HDCP copy protection, which prevents playback of illegally
copied movies.
2
Make sure that the HDMI cable is not broken and is securely
connected.
3
Make sure that the audio and video formats of the content
being used (such as a Blu-ray disc) are supported by the
source and destination devices you are using.
4
Make sure that your TV or projector is set to the input that
the switcher is connected to.
5
Make sure that you are using high-speed HDMI cables for
all connections. We recommend high-quality Rocketfish
HDMI cables, available at your local Best Buy or Future Shop
stores in lengths from 4 to 24 feet.
6
Unplug the HDMI switcher’s AC power adapter, then plug it
back in again.
7
Make sure your switcher is plugged in and turned on.
1
Make sure that you are using high-speed HDMI cables for
all connections. We recommend high-quality Rocketfish
HDMI cables, available at your local Best Buy or Future Shop
stores in lengths from 4 to 24 feet.
2
Make sure that the TV or projector can support the same
video resolution that the source devices are using.
3 Make sure the HDMI cables are not broken and they are
securely connected.
Troubleshooting
LED are not on or lit
Symptom
Possible solution
No video
and/or audio
Video has
some noise
