background image

SuperSpeed 7-port USB 3.0 Hub

RF-30HUB7

QUICK SETUP GUIDE

Thank you for purchasing the Rocketfish SuperSpeed 7-port USB 3.0 
Hub.

Features

•  Adds seven USB 3.0 ports to your USB 3.0 enabled computer.  

•  Supports ultra-fast data transfer rates of up to 5 Gb/s (10 times 

faster than USB 2.0).

•  Is backward compatible with USB 2.0 and USB 1.1 devices.

•  Supports Microsoft® Windows® 7, Windows Vista®, and Windows® 

XP operating systems .

•  Supports MAC OS X version 10.4 or higher operating system (USB 

2.0 only).

•  Works with high-bandwidth SuperSpeed USB 3.0 devices, such as 

external hard disks, high resolution webcams, camcorders, video 
surveillance cameras, digital video cameras, multi-channel audio, 
and more.

•  Has hot swappable and Plug & Play capability.

•  Has over-current protection built into each port to protect both 

connected devices and your hub from power surges.

•  Complies with Universal Serial Bus 3.0 Specification, Revision 1.0.

Package contents

•  SuperSpeed 7-port USB 3.0 HUB

• AC power adapter

• 

Quick Setup Guide

Components

System requirements

•  PC or Macintosh computer with an available USB 3.0 port. (You 

can connect to a USB 2.0 port, but your hub will only run at USB 
2.0 speeds.)

Installing your hub

Note

: Make sure that the driver for your existing USB 3.0 controller 

has been installed on the computer. When you connect your hub 
to a computer, the computer detects your hub and automatically 
installs it.

1

  Slide open the cable compartment cover on the back side of 

your hub, pull out the USB cable, then plug the cable into any 
available USB 3.0 port of the computer.

Note

: You can purchase a USB 3.0 cable (A male to A female) to 

extend the length of cable.

2

  Plug the AC power adapter into your hub’s 

DC 

jack and into a 

power outlet. The driver installs automatically and the power 
LED lights. Your hub is ready for use. 

Caution

: Only use the AC power adapter specified by the 

manufacturer.

Specifications

FCC Part 15

This equipment has been tested and found to comply with the 
limits for a Class B digital device, pursuant to Part 15 of the FCC 
Rules. These limits are designed to provide reasonable protection 
against harmful interference in a residential installation. This 
equipment generates, uses and can radiate radio frequency energy 
and, if not installed and used in accordance with the instructions, 
may cause harmful interference to radio communications. 
However, there is no guarantee that interference will not occur in a 
particular installation. If this equipment does cause harmful 
interference to radio or television reception, which can be 
determined by turning the equipment off and on, the user is 
encouraged to try to correct the interference by one or more of the 
following measure:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and receiver.

– Connect the equipment into an outlet on a circuit different from 

that to which the receiver is connected.

– Consult the dealer or an experienced radio/TV technician for 

help.

SAFETY: General Power Safety 

Caution

:

•  Check the voltage rating before you connect the equipment to 

an electrical outlet to ensure that the required voltage and 
frequency match the available power source. 

•  Place the AC adapter in a ventilated area, such as a desk top or 

on the floor. Do not cover the AC adapter with papers or other 
items that will reduce cooling.

•  AC adapters can become very hot and could cause burns or fire 

hazards. Make sure to use them properly. 

•  Do not use an AC adapter with frayed or exposed wires.
•  AC adapter can cause a fire or chemical hazard if not used 

properly. Do not disassemble. 

•  If you use an extension cord, ensure that the total ampere rating 

of the products plugged in to the extension cord does not 
exceed the ampere rating of the extension cord. 

FCC Part 15

Changes or modifications not expressly approved by the party 
responsible for compliance could void the user’s authority to 
operate the equipment.

One-year limited warranty

Visit www.rocketfishproducts.com for details.

Contact Rocketfish:

For customer service, call 1-800-620-2790
www.rocketfishproducts.com

© 2011 BBY Solutions, Inc., All Rights Reserved.
Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richfield, MN USA 55423-3645
ROCKETFISH is a trademark of BBY Solutions, Inc. All other products and 
brand names are trademarks of their respective owners.

 ENGLISH 11-0325

USB 3.0 ports

USB 3.0 

ports

USB 3.0

ports

DC jack

USB 3.0 

cable

Interface 

1 upstream USB port: 

 

USB 3.0 A plug (with cable)

 

7 downstream USB ports: 

 

USB 3.0 A receptacle

Dimension (W × H × D) 

4.35 × 4.17 × 1.42 in.

 

(11.05 × 10.6 × 3.6 cm)

Weight 140 

g

Interface to PC 

USB 3.0

Interface to Device 

USB 3.0 

Data transfer rate 

USB 3.0 : 5.0 Gb/sec

 

USB 2.0 : 480 Mb/sec

Indicator Power 

LED 

indicator 

Power source 

AC Power Adapter 12V/3A

Output voltage per-port 

DC+5V

Output current per-port 

900mA (Max)

System support 

Windows XP

 Windows 

Vista

 Windows 

7

 

MAC OS X version 10.4 or higher

Operating temperature 

32° ~ 104°F (0° ~ 40°C)

Operating humidity 

20 % ~ 80 % RH

Certification 

FCC Class B, ICES-003, CE

RF-30HUB7_11-0325_QSG_ENSP_V2.eps   1   4/4/2011   5:42:02 PM

RF-30HUB7_11-0325_QSG_ENSP_V2.eps   1   4/4/2011   5:42:02 PM

Reviews: