_____________________________________________________________________________________________
© Rocket Espresso Ltd. RE series User Manual Ed. 07.2015. Specifications subject to change without notice.. Page 26
FillingUp T-Out
120”
(Typical factory setting)
Water filter
Factory setting is 0 (= disabled).
Depressing “A” again the display will now read “OFF”.
Depress “D” to switch to normal operation.
Notes:
To exit the programming menu you must scroll the menu (depressing repetitiously key
A) until the display reads “OFF”. Now switch to normal operation mode depressing key
D.
In case of an erroneous setting, you must scroll the menu (depressing repetitiously
key A) until the display reads “OFF” . Now keep “A” depressed until the display reads
“language”. You are again in technician programming mode. Please proceed scrolling
the menu (using “A” key) to the setting you wish to correct. When done, depress key
A repetitiously until the display reads “OFF”. Depress key “D” to move to machine’s
normal operation.
In case of a major setting mistake, all led on the keys are flashing. Please scroll the
menu with “A” key until the display reads “OFF”.
Now you must turn the machine off and then on again.
Enter the technician’s programming menu: While keeping depressed key “A”, depress
key “D”. The display will read “OFF”.
Now keep key “A” depressed again until the display reads the first programming step
(“language”). Now you are in the programming mode.
Please proceed scrolling the menu (using “A” key) to the setting you wish to correct.
When done, depress key A repetitiously until the display reads “OFF”. Depress key “D”
to move to machine’s normal operation.
