Rocket Amusements Crazy Claw The Emoji, Operation Manual, Page: 23 / 107

Rocket Amusements Limited
Copyright © 2018 Rocket Amusements Limited
- 23 -
Power supply voltage settings
12 volt setting. The power supply features a single adjustment; the 12 volt level is adjusted by turning the
small potentiometer (plastic screw) located to the side of terminal block. Care must be taken, turn the screw
gently and slowly and use a voltmeter to monitor the exact 12 volt output from the power supply. Set as near
to exactly 12 volts as possible.
Main AC voltage
The machine operates normally and safely with main AC voltage ranging from 100 – 240 volts. No
adjustments are required to support voltage within that range.
Circuit breaker operation
For added safety in the event of an overload or short circuit, a circuit breaker located at the power strip will
cut off AC power to the machine. After careful inspection, and after the cause of the break has been
determined and properly corrected by a qualified technician the reset button may be firmly pushed to restore
power to the machine. Refer to the image below.