MOD
The
RockBoard®
MODs offer you the solution you need to organize all the connections to and from your
RockBoard®
.
Fitting all
RockBoard®
’s,
except the Duo 2.1
, each MOD has various cable connections to fit a wide variety of needs as a convenient ‘thru box’.
RockBoard®
MODs allow you to hook up your pedals permanently underneath your board and have a central access point for your instrument,
amp and power supply. You are using TRS, XLR, MIDI or USB in your setup? We’ve got you covered!
The
RockBoard®
MODs provide you with all the connections you’ll need.
Installation is as easy and convenient as it gets:
Depending on your choice, the
RockBoard®
MODs offer different options, but let’s start with the ones they have in common:
•
TRS In/Output: You can use these for MONO, STEREO or Balanced Inputs or Outputs, Effects Loops, Looper Switcher and
basically anything that uses a 1/4” jack
•
IEC In/Output: This allows you to connect the AC IEC of your multi-power supply
Here are the connections only found in MOD 1:
•
XLR IN/Output: This allows the routing of any audio signal from a DI box or other balanced output directly into a mixing board
or audio interface for recording purposes
•
DC In/Output: Some multi-Power supplies use an external power adapters instead of an AC IEC cable,
like the
RockBoard®
Power Block or the MXR M238 ISO-Brick
TM
* Power Supply for example. We’ve got that covered, too
MOD 1 Connections:
5x TRS In/Output
manuals
1
+
2 + 3
MOD
1
9V
Input
AC IEC
Input
9V
Input
5x TRS In/Output
STEP 2
Turn the
RockBoards®
pedalboard upside
down.
STEP 1
Remove the rubber
frame of your
RockBoard®
’s front
cavaity.
STEP 4
Secure the MOD
using the included
screw nuts, and
TX10 wrench.
That’s all, now you
are ready to go!
STEP 3
Load your chosen
MOD from the front
into the slot.
AC IEC
Input
XLR
In/Out
XLR
In/Out
* M238 ISO-Brick
TM
Power Supply is a registered T
rademark by Dunlop Manufacturing, Inc.
