...............................................................................................................................
...............................................................................................................................
...............................................................................................................................
............................................................
located above the user or should at least at the waist level of the user. An
attachment point below this level will cause a serious injury or death. The
anchor point must conform to the requirements of the EN 795 standard and
the minimum strength of it must be 12 kN.
6.3 Various Situations
* A fall arrest harness is the only device allowable for supporting the body in
a fall arrest system.
* In a fall arrest system, it is essential to check the required clearance under
the user before each use, to avoid any collision with the ground or an obstacle
in case of a fall.
* Make sure that the anchor point is correctly positioned, in order to limit the
risk and the height of a fall.
* When using multiple pieces of equipment together, a dangerous situation
can result if the safety function of one piece of equipment is affected by the
safety function of another piece of equipment.
* Users must be medically fit for activities at height. Warning, inert suspension
in a harness can result in serious injury or death.
7. Kaya General Information
7.1 Life Span
The potential life time is 10 years from the date of production, it is very
difficult to define the exact service life of it as it varies according to
the frequency and intense of use, environmental conditions, correct
maintenance and storage. Recommended life expectancy of this body
harness is 5 years from date of first use If the product has one of the
deviations below it should be withdrawn from service immediately and
should be destroyed to prevent further usage.
* It has suffered a heavy shock load or has had a load dropped onto it.
* There are discoloration, stiffness, cuts and tears, glazed or fused areas
on the webbingg.
* There are cracks, deformation, corrosion or excessive wear on the metal
parts.
* It fails to pass inspection (before usage or detailed inspection)
* Labels (markings) are illegible or absent
* It is extremely dirty and does not respond to normal washing.
* It has come into contact with chemicals and especially acids or is even
suspected.
* Its history is unknown.
* Its life time stated in the user’s manual has expired or even it has never
been used.
* There is a slightest doubt that the products is no more safety and reliable.
* If the product has been used to arrest a fall
7.2 Storage
Product is sold with storage bag and user guide. Additionally model and
applied standards are provided with the product. During the storage keep
the product in it’s own bag. Storage area of the product should meet the
following requirements;
- Dry, away from direct sun light, room temperature.
- Do not store together with acids, solvents etc.
- Keep away from direct heat sources.
- If the product gets humid during the storage, dry the product in room
temperature before usage.
7.3 Maintenance
Personal protection equipment should be checked regularly to make sure
that the equipment will operate properly whenever it is used Harness can
be wiped with a wet sponge, for cleaning.
A mild soap and warm water not exceeding 30ºC can be used for difficult stains.
After cleaning, it should be thoroughly rinsed in clean cold water, hung out in a
dry, dark and cool place and kept away from the direct heat sources. Harnesses
should be hung out or placed loosely in a bag or another container in order to
protect it from harmful fumes, corrosive agent or light (artificial or sunlight).
Do not use acidic or solvent chemicals!
7.4 Changes and Repair
Changing a part, repair and addition to any component to product is strictly
forbidden without written authorization of KAYA. Any repair can be made only
by KAYA. Otherwise KAYA is not responsible for any possible consequences.
7.5 Transportation of Product
The product should be transported in a bag to protect it from damp,
chemicals and other objects.
7.6 Periodic Inspection of Product
Harness should be inspected by the user before each use and an additional
detailed inspection must be carried out by KAYA or a competent person
who is authorized by KAYA in every 12 months.
The safety of users depends upon the continued efficiency and durability
of the equipment.
During the inspection of product following information should be recorded;
Type of the product, model, contact information of manufacturer, serial
number, date of production, date of purchase, date of first usage, next
inspection date, problems, recommendations, name and surname of the
inspector. For further information visit www.kayasafety.com
7.7 Guarantee
This product has 3-year guarantee against all material or manufacturing
defects under proper usage and storage conditions. Guarantee will be void if;
product is misused; torn, cut, corroded; in case of unauthorized repair or
changes are made on the product or damaged by accidents.
8. Certification
This product is certified in accordance with
PPE Regulation 2016/425 EU
by
APAVE SUDEUROPE SAS CE 0082
Notified Body after tests according to EN
358:2018, EN 361:2002.
* KAYA has Module D Quality System Certificate according to PPE Regulation;
2016/425 EU by APAVE SUD EUROPE SAS CE 0082 and confirms each
product same as the tested sample.
* You can reach the DoC of product on our website www.kayasafety.com
APAVE SUDEUROPE SAS (n°0082)
13322 MARSEILLE CEDEX 16 – France
T: +33 (0) 4 76 53 52 22 F: +33 (0) 4 76 53 32 40
Warning:
Read user guide carefully before usage. The user manual, periodic
examination, information, repair and maintanance instructions should be
published in the official language of the country in which, the item is in
service. Please request the user the user manual in your language from your
distributor.
Warning:
Read user guide carefully before usage.
Manufacturer:
KAYA YAPI İÇ MİM. TAS. İNŞ. DEN. TAAH. SAN. ve TİC. A.Ş.
Address:
GOSB. 1000 Sok. No:1015 Çayırova 41480 KOCAELİ / TÜRKİYE
T :
+ 90 262 677 19 00
F :
+ 90 262 677 19 01
E :
W:
www.kayasafety.com