Magnetel
®
Light Module Installation Instructions
ISO 9001:2008 CERTIFIED
DS-1801
The Measure of Excellence
See reverse side for dimensional data, materials of construction, performance, and advice on how to order.
* Materials and specifications are subject to change with out notice.
1) Unscrew and remove existing cover screws from
Magnetel
®
4” R3D
®
Dial
Notes:
•
0023S00031/0023S00032 Light Module is only compatible with the 4” Fluorescent Dial
(5APKS03045 or 5APKS03079)
•
0023S00033 Light Module is compatible with the 4” Standard Silver background Dial
(5ANTS03047)
2) Gently pop out existing cover plate and remove plug
3) If strain relief is required, insert strain relief clip into
U-shaped slot in crystal.
Note: Strain relief clip is only required if there is no Remote
Monitoring plug-in module. Relief clip is not needed if Light
Module and Remote Monitoring are utilized simultaneously.
See step 5 where Remote Monitoring Plug-in module is snapped
onto the dial.
Cover Plate
Plug
Relief Clip