manualshive.com logo in svg

Roche ACCU-CHEK Inform II, Operator'S Manual

The Roche ACCU-CHEK Inform II operator's manual is an essential resource for users of this innovative product. You can easily access and download the manual for free from our website, ensuring you have all the necessary instructions and information to maximize the performance of your ACCU-CHEK Inform II.

Share
Download
background image

Initial Startup • 

9

119

9.8

Options for test strips

This menu allows you to select options for handling lot 
numbers and specify whether the operator is allowed to 
add or delete reagent lots, edit the expiration date and 
limit values on the meter (see “Creating a setup pass-
word” on page 126). 

1

Touch the desired option to enable it:

■

Reagent Editing

–

Allowed

: Enables the operator to edit the reagent 

information without needing a password

–

Password Needed

: Enables the operator to edit the 

reagent information only after entering a password

■

Strip Lot Verification

–

Display only

: The lot number is shown on screen but 

the operator cannot confirm it or select a different 
lot number.

–

Confirmation

: The operator must confirm the lot 

number displayed and can enter alternative lot 
numbers manually or via barcode scanner.

–

List selection

: The operator can also select from a 

list of stored lot numbers.

–

Scan only

: Lot numbers can be verified via barcode 

scanner only.

2

Touch 

 to change to the second screen of 

options, or touch 

 to exit this menu without 

saving any changes.

When using a data management system for configu-
ration, it is possible to fully disable the 

Reagent Editing

 

option.

Reagent Options

Allowed
Password Needed

Display only
Confi rmation
List selection
Scan only

Reagent Editing

Strip Lot Verifi cation

Not Allowed

12:48 pm

09/18/13

Summary of Contents for ACCU-CHEK Inform II





















































































































































































































Reviews:

No comments

Related manuals for ACCU-CHEK Inform II

Sugarteck TD-4207B Owner'S Manual preview
TD-4207B
Brand: Sugarteck Pages: 44

Brands by name

Popular brands

Load more brands