Roche Accu-Chek Active User Manual Download Page 10

Page: 10 / 70

Steps before testing

Checking the display

You can check if all of the display elements are properly displayed, by carrying out a full display check.

Compare the elements displayed on your meter with the display

shown here.

If any of the display elements are missing or the unit of measurement

shown for the blood glucose results is not the correct one, please ask

your healthcare professional to exchange the meter.

Press the M and S buttons at the same time to end the display check

and turn the meter off.

With the meter turned off, press

the M and S buttons at the same

time for approximately 2 seconds

until the meter is switched on.

mg/dL meter

mmol/L meter

man_06658768001_02_EN.indb 8

14.08.2013 10:16:41

Summary of Contents for Accu-Chek Active







































































Search results

Summary of Contents for Accu-Chek Active

Reviews:

Related manuals for Accu-Chek Active

Brands by name

Popular brands

Roche Accu-Chek Active, User Manual

Search results

Summary of Contents for Accu-Chek Active

Reviews:

Related manuals for Accu-Chek Active

Brands by name

Popular brands