3
Installing the TV interface arms to the back of your flat panel TV
Caution:
Never lay the flat panel, face down on the screen, it should be tilted leaning against the wall or other solid
surface, laying the flat panel face down on the screen may lead to permanent damage.
Before installation, the TV interface arms(BB) must be vertically placed and the distance from the flat panel should
be as short as possible .Thread the screws (A,B,C,D) through the square pad (G), the TV interface arms (BB) and
spacer ( H) if required, into the flat panel. Tighten the screws firmly with a Phillips screwdriver.
Hook the TV with interface arms to the wall bracket.
Caution:
Some flat panels are heavy: two strong people are required; lift and position carefully. Lift TV with
interface arms onto the cross bar of the wall bracket (AA), and then lower into place until the hooks are fully seated
on the cross bar of the wall bracket assembly.
Locking Bar
figure 3
figure 4
figure 5
If necessary
4-spacer-(H)
Slide the locking bar (CC) from left to right through the slots in the wall bracket, to secure the screen in place as
shown in figure 5. The right side of the locking bar will come out through the right hand slot of the wall bracket. Use
the long Allen key to tighten the security screw to prevent the locking bar from being removed. This will prevent
unauthorized removal of the screen.
figure 6
Lifting TV
To Connect
Cable
