REGULATORY COMPLIANCE STATEMENTS FOR THE ELO 7.1 AIR RX & TX
LOCAL RESTRICTIONS ON RADIO USAGE
Caution:
Due to the fact that the frequencies used by wireless devices may not yet be harmonized in all countries, these radio products are designed for use only in specific
countries, and are not allowed to be operated in countries other than those of designated use. As a user of these products, you are responsible for ensuring that the products
are used only in the countries for which they were intended and for verifying that they are configured with the correct selection of frequency and channel for the country of use.
Any deviation from the permissible power and frequency settings for the country of use is an infringement of national law and may be punished as such.
To determine whether you are allowed to use your wireless network device in a specific country, please check to see if the radio type number that is printed on the identification label
of your device is listed in the manufacturer‘s OEM Regulatory Guidance document at the following URL http://www.turtlebeach.com/homologation or contact Turtle Beach directly.
FEDERAL COMMUNICATIONS COMMISSION (FCC) COMPLIANCE NOTICES
This section includes the following FCC statements for the Elo 7.1 AIR:
• FCC IDs: XGB-TB18140 & XGB-TB15143
• Class B Interference Statement
• RF Radiation Exposure & Hazard Warning
• Non-Modification Statement
CLASS B INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC CAUTION:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired operation.
RF RADIATION EXPOSURE & HAZARD STATEMENT
To ensure compliance with FCC RF exposure requirements, this device must be installed in a location such that the antenna of the device will be greater than 2 cm (0.8 in.)
from all persons. Using higher gain antennas and types of antennas not covered under the FCC certification of this product is not allowed. Installers of the radio and end users
of the product must adhere to the installation instructions provided in this manual. This transmitter must not be co-located or operated in conjunction with any other antenna
or transmitter.
NON-MODIFICATION STATEMENT
Use only the supplied internal antenna. Unauthorized antennas, modifications, or attachments could damage the Elo 7.1 AIR RX & TX Models and violate FCC regulations. Any
changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate this equipment. Please contact Turtle Beach
for a list of approved 2.4 GHz antennas.
This product is compliant with the Consumer Product Safety Improvement Act of 2008, Public Law 110-314 (CPSIA)
CANADIAN ICES STATEMENTS
IC: 3879A-18140 & 3879A-15143
This device complies with ICES-003 and RSS-247 of Industry Canada.
Operation is subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.
Ce dispositif est conforme aux normes NMB003 et CNR-247 d’Industrie Canada.
1. L’utilisation de ce dispositif est autorisée seulement aux conditions suivantes :
2. il ne doit pas produire de brouillage et l’utilisateur du dispositif doit être prêt à accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de
compromettre le fonctionnement du dispositif.
This equipment complies with Industry Canada radiation exposure limits set forth for an uncontrolled environment.
Cet équipement est conforme à l’exposition aux rayonnements Industry Canada limites établies pour un environnement non contrôlé.
To prevent radio interference to the licensed service (i.e. co-channel Mobile Satellite systems) this device is intended to be operated indoors and away from windows to provide
maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing and not supported by Elo 7.1 AIR RX & TX Models.
Pour éviter les interférences radio au service agréé (c.-à-d. Les systèmes par satellite mobile co-canal), cet appareil est destiné à fonctionner à l‘intérieur et à l‘extérieur des
fenêtres pour assurer un blindage maximal. L‘équipement (ou son antenne d‘émission) installé à l‘extérieur est soumis à l‘octroi de licences et n‘est pas pris en charge par les
modèles Elo 7.1 AIR RX et TX.
RF RADIATION EXPOSURE & HAZARD STATEMENT
To ensure compliance with RSS-102 RF exposure requirements, this device must be installed in a location such that the antenna of the device will be greater than 2 cm (0.8
in.) away from all persons. Using higher gain antennas and types of antennas not covered under the IC certification of this product is not allowed. Installers of the radio and end
users of the product must adhere to the installation instructions provided in this manual. This transmitter must not be co-located or operated in conjunction with any other
antenna or transmitter.
EXPOSITION AUX RADIATIONS RF & MENTION DE DANGER
Pour assurer la conformité avec les exigences RSS-102 d‘exposition aux RF (Radio Fréquences), cet appareil doit être installé dans un endroit ou l‘antenne de l‘appareil sera
située à une distance de plus de 2 cm (0.8 po) de toutes personnes. L’utilisation d‘antennes à gain plus élevé et les types d‘antennes qui ne sont pas couverts en vertu de la
certification IC de ce produit n‘est pas autorisée. Les installateurs de la radio et les utilisateurs du produit final doivent se conformer aux instructions d‘installation fournies
dans ce manuel. Cet émetteur ne doit pas être co-implanté ou exploité en conjonction avec toute autre antenne ou transmetteur.
