INSTRUCTION MANUAL
ASSEMBLY, INSTALLATION, USE AND MAINTENANCE.
Rev. 07/2015
Rocam Losi s.r.l. declines every responsibility on any print and/or transcription mistake contained in this booklet
Rocam Losi s.r.l. can change features and data of this booklet with the proposal of keeping on increase the quality of its products.
Anytime and without notice, this booklet can’t be considered as contract with third parties.
3
4.1 Components
5. Cleaning and maintenance
The solid wood must be cleaned with a soft cloth. In case of stubborn stains we
recommend the use of a small amount of mild detergent. Do not use corrosive products
nor diluents.
WARNING: The solid wood colour may vary during its lifetime due to
several reasons like the direct exposure to the sunlight and the humidity.
Do not insist for too long on the same area during the cleaning operations
and do not press too hard with the cloth in order to avoid the halos and
polishing fading.
Use a soft cloth moistened with a small amount of alcohol or non abrasive products
for the cleaning of the chromed steel parts. After the
cleaning, dry carefully in order to avoid the
persistance of halos.
5.1 Burner
It is recommended to connect a butane or
propane gas cylinder to the provided tube.
A scheme of each knob connected to the
burner is printed on the front panel.
After opening the cylinder valve, light up the
burners in this way:
Press and turn to the left the corresponding
knob, put it on the “Max” position and bring a lighted
match to the burner.
MERCURIO F/1
– F/2
Ref.
Code
Qty.
Description
1
RS125
4
Castor with brake
2
F/1
1
Burner 1 fire
F/2
1
Burner 2 fires
3
1
Tip up dish-holder
4
1
Chromed bottle holder
