2013 年 11 月 01 日
1) When using the scan button,the camera if you can search the wireless
signal to the router?
2) SSID is consistent with the wireless router's SSID?
3) There is a special character of Wireless SSID and password or not,
change it if yes.
4) Whether to open the wireless mac address filtering?
5) Whether to open the ARP binding ?(camera wireless and wired LAN is
two mac address, the same IP).
6) Camera distance is not too far from the router?(Under normal indoor
environment, try to stay within 20 meters).
7) Whether the antennal of the camera be tightened?
Setting:
Full name is Universal Plug and Play,Popular speaking ,it’s automatic
port mapping. Users To use this feature, you need the router supports UPnP
function and turned on,select this button.
DDNS Settings:
The factory default is enabled manufacturers domain name, without setting
a third party DDNS service can be directly accessed using the domain
name manufacturers, third-party DDNS service support DynDns,
3322,9299, etc.
Please check the following points if default domain can not be connected:
1) The parameters of cameras is correct or not , you can use network
camera installation wizard do one key setting if you don’t know how to set.
2) Whether the DNS address is correct .then you can check whether your
