Roca IN-WASH INSPIRA SMART TOILET WH, Installation Manual

Page: 7 / 16

7
OFF
25A l
D
n 0.03A
10 ó 15A
A
According to current legislation
240 VAC
50 Hz.
1700 W Max.
D
C
B
Mandatory 3 x 1mm 2
L Min. = 300 mm
ØMin: 6 mm
ØMax: 8,5 mm
A
The electrical installation must be protected by means of a IDn 0,03A and 25A differential switch and a
magnetothermal switch of 10 or 15A. Both switches must be placed outside the bathroom.
B
A fixed power connection must be connected by a dedicated flexible power cable consisting of 3 wires (active,
neutral, earth) of at least 1mm
2
. The connection must be done inside an IPX4 or better junction box. If it is
necessary to replace the power cable, this must be done by qualified service staff.
C 240V, 50 Hz.
Note
- Any electrical work conducted on this product must be installed only by qualified personnel, in
accordance with AS/NZS 3000 Wiring Rules.
- Please consult with a qualified electrician to confirm an appropriate installation location.
- No additional electrical equipment should be fitted inside the WC.
- This product (IPX4) shall not be exposed to water jets for cleaning purposes.