Roca EURET A35945E000, Installation Instructions Manual

Page: 6 / 20

6
1
2
3
4
Install panel and battery (A35945E..0 , A35945S..0)
Take out the panel kit and battery kit from accessory box. Follow the below diagram to put in four AA batteries.
• Please be aware of the positive and negative electrode direction of
battery. The raised part of battery case should be aligned with the slot
of battery case.
• Without sealing the battery case firmly, this will affect the use, water-
proof capability and life of product.
• The internal part of battery case required to be remained dry.
• New and old batteries should not be mixed for usage.
Use a screwdriver to screw the panel to the control box, and finally insert the IR filter into the panel to finish the installation.
Install panel and battery (A35945E..0 , A35945S..0)
• Pay attention to the installation direction and keep the control wire downward.
• Pay attention to installation direction of the IR filter.
• Do not push or drag the IR filter forcefully to avoid damaging.
• Pay attention to the installation direction and keep the control wire downward.
• Pay attention to the connection of the connector , and make sure the connection is proper to avoid circuit problem and
failure of water-proof function.
• Be aware of the direction of cable connection, it should not be forced when installed.
NOTE:
In case of maintenance, insert a needle (Not included) into the hole of IR filter and remove the IR filter. Use a screwdriver to release
two screws and remove the panel.
5 Installation procedure
Push the power supply into the control box.
Install panel and AC Power Assembly (A35945M..0 , A35945T..0)