Robustel R5020 Lite Hardware Manual
RT098_HM_R5020_Lite 11/11
Login to the Device
1.
Connect the router
’
s Ethernet port to a PC with a
standard Ethernet cable.
2.
Before logging in, manually configure the PC with
a static IP address on the same subnet as the
gateway address, click and configure "Use the
following IP address".
3.
To enter the gateway's web interface, type
Internet browser.
4.
Use login information shown in the product label
when prompted for authentication.
5.
After logging in, the home page of the web
interface is displayed, then you can view system
information and perform configuration on the
device.
6.
The automatic APN selection is ON by default, if
need to specify your own APN, please go to the
menu
Interface->Link Manager->Link
Setting->WWAN Settings
to finish the specific
setting.
7.
The more configuration details please refer to
RT123_SM_RobustOS Software Manual
.
(END)
Support: [email protected]
Website: www.robustel.com
©2022
Guangzhou
Robustel
Co.,Ltd.
All rights reserved. Subject to change without notice.
