Robustel GoRugged M1000 USB User Guide
RT_M1000_USB_UG_v01.00
4.30.2012
12 / 24
Confidential
2.3
Mounting the Modem
Use 2 pcs of M3 screw to mount the modem on the wall or mount it on the Din-Rail.
2.4
Installation the SIM Card
Be sure to insert a SIM card before you use the modem.
Note
: A SIM card set with PIN code cannot be used normally in the modem. You need to use Modem Configurator to
unlock the PIN code of the SIM card before using it in the modem.
Make sure to disconnect the charger and switch off your modem before inserting or removing your SIM/USIM card.
Inserting SIM Card
1.
Make sure your charger is disconnected.
2.
Use a ball pen or paper clip to press the SIM holder eject button. The SIM holder will come out a little. Then take
out the SIM holder.
3.
Insert the SIM card, with the metal surface facing downward, make sure it has completely sit on the tray. Put the
tray back into the slot, until you hear “a cracking sound”.
Removing SIM card
1.
Make sure your charger is disconnected, and then press and hold down the power key until the
modem
is
powered off.
2.
Press the SIM card until you hear “a cracking sound”, when the SIM card will pop up to be pulled out.
Note:
1.
Don’t pull out the SIM holder without pushing the eject button.
2.
Don’t touch the metal surface of the SIM card in case information in the card is lost or destroyed.
3.
Don’t bend or scratch your SIM card. Keep the card away from electricity and magnetism.
4.
Make sure to disconnect the power source from your modem before inserting and removing your SIM card.
