Robustel EG5120 Hardware Manual
RT090_HM_EG5120
7/8
Hardware Installation
1.
SIM Card Installation
. Remove the SIM card cover
to insert the SIM cards into the device, then screw
up the cover.
2.
Antenna Installation.
Rotate the antenna into the
antenna connector accordingly.
3.
Terminal Block Installation.
Insert the 6PIN and
8PIN terminal blocks into the interfaces
connector, then can connect the devices or
sensors to the gateway with wires via
corresponding interfaces e.g. RS232/RS485,
DIDO...
4.
Power Supply installation.
Insert the power
supply cord into the corresponding terminal block
if needed, then insert the terminal block into the
power connector.
5.
DIN Rail Mounting.
Use 2 M3 screws to fix the DIN
rail to the device, then hang the DIN rail on the
mounting bracket.
6.
Grounding the Device.
Grounding will help to
prevent the noise effect due to electromagnetic
interference (EMI). Connect the device to the site
ground wire by the grounding screw before
powering on.
