Robusta CYCLONIC 31, Instruction Manual

Page: 24 / 48

24
EN
CLEANING THE ExHAUST AIR FILTER
The exhaust air fi lter is located in the compartment on the back of the vacuum cleaner (see „Items Supplied
and Device Overview“ chapter, „Rear View“ section).
1. Press the fi lter compartment lid catch and remove the lid.
2. Remove the exhaust air fi lter by pulling it down and out of
the fi lter compartment.
3. Tap out the contents of the exhaust air fi lter over a dustbin
and brush off the loose dirt. Wipe down the dust container
using a damp cloth.
4. If necessary, thoroughly rinse the exhaust air fi lter using
clear, lukewarm water. CAUTION: Do not under any
circumstances clean the fi lter in a washing machine or
dishwasher! Then shake off any excess water and allow
the fi lter to dry completely in the air before reinserting it.
5. When all parts are dry, insert the exhaust air fi lter in the
fi lter compartment.
6. Place the fi lter compartment lid onto the exhaust fi lter
compartment. It must engage audibly.
Storage
• You can hook the fl oor nozzle into the bracket on the back of the device for convenient storage and push
the telescoping tube together as far as possible.
• Store the vacuum cleaner in a dry, cool indoor room that is not accessible for children and animals.
TROUBLESHOOTING
If your device no longer functions properly, exhibits damages or requires a spare part, please contact our
customer service centre. For your own safety, do not perform any repairs yourself. The following table gives
you tips on how to resolve minor problems yourself.
Problem Potential cause/solution/tips
The vacuum
cleaner has no
suction power. • Is the mains plug not correctly connected with the socket?
Correct the position of the mains plug.
• Is the socket defective? Try another socket.
• Check the fuse for your mains connection.
• Are the fi lters plugged? Clean the dust and exhaust filter.