Robur OCDS006, Installation And Operation Manual

Page: 10 / 16

10
6. Turn the
knob to set the desired value.
7. Press the
knob to confirm the value entered. The day
stops flashing and the icon disappears.
8.2 DAY ROOM TEMPERATURE SETTING
1. Press the key until the icon starts flashing (Figure
8.4
p. 10).
2. Turn the
knob to set the desired value.
Figure 8.4
Day room temperature setting
8.3 NIGHT ROOM TEMPERATURE SETTING
1. Press the key until the icon starts flashing (Figure
8.5
p. 10).
2. Turn the
knob to set the desired value.
Figure 8.5
Night room temperature setting
8.4 HEATING TEMPERATURE SETTING
1. Press the
key until the icon starts flashing (Figure
8.6 p. 10).
2. Turn the knob to set the desired value.
Figure 8.6
Heating temperature setting
This temperature value for models of the Caldaria family
must be set to 80 °C. The change of this value will be
operative on the boiler until the remote control is con-
nected to it.
8.5 DHW TEMPERATURE SETTING (NOT
APPLICABLE)
8.6 OUTDOOR PROBE KD VALUE SETTING
(NOT APPLICABLE)
9 SETTING MANUAL/AUTOMATIC OPERATION
The remote control provides the possibility to manage the room
temperature in two ways: manual or automatic.
▶
In manual mode, the user selects the desired room temper-
ature, which will be maintained until a new change is made.
▶
In automatic mode, the room temperature setpoint is de-
termined by the time and day corresponding to the weekly
program set.
9.1 MANUAL OPERATION
1. Press the key until the icon appears. The display
shows the set temperature value flashing (Figure 9.1 p. 11).
2. Turn the knob to set the desired temperature.
3. After the 30-second time delay, the central display returns to
the current temperature.