Assembly and installation
Installation manual – System controller
17
2
2.4
QAA74.611 ADVANCED ROOM UNIT
2.4.1
Location
Figure 2.9
Description of installation position of room unit
The room unit should be installed in a reference room,
usually the living room, bearing the following in mind:
▶
The room unit must be installed about 1,5 m off the
ground, in an area which allows the sensor to read the
room temperature as accurately as possible, it should
therefore be out of the way of draughts, sunlight and
other sources of heat.
▶
If wall mounted, leave enough space above the unit
for it to be installed and removed when necessary.
Once removed from its base, the room unit is no
longer powered and is thus inactive.
2.4.2
Installation
Figure 2.10
Description of installation procedure for room unit QAA74.611
b
1
4
5
2
3
Do not install the room unit in rooms exposed to
water or damp.
For further details on the operation, installa-
tion and use of the room unit, refer to section
5
p. 33, in particular Paragraph 5.1.5 p. 36 and
5.1.7
