Robson GDP1000L, Owner'S Manual, Page: 27 / 36

7
Functions Functions
10. Split function
The keyboard of your piano may be divided into two sections. In each section you may
choose a different voice, so you may play different voices with your left hand and your
right hand.
First you should choose the voice to be
played in the right section of the keyboard.
Then press the SPLIT button to enter the
Split mode. Now you may choose the voice
you intend to play in the left section of the
keyboard.
It is even possible to select voice combi-
nations for each section of the keyboard.
When you press the SPLIT button again
you will leave the Split mode.
The key where the keyboard is divided may
be set by pressing the SPLIT button for a
long time while you are in the Split mode.
Now the display will show the Split point that
is set. By playing the key where you would
like to set the Split point, the new Split point will be set.
11. Transposing
By using the TRANSPOSE buttons you can transpose the keyboard up or down by
12 semitones (in semitone steps, indicated by the LCD-display). To reset, press
down both TRANSPOSE buttons simultaneously.
12. Reverb effect
With the Reverb-effect the sound reverb-
eration of the room is simulated. Three
different kinds of rooms (Off, Hall,Room
T h e a t r e ) m a y b e c h o s e n b y u s i n g t h e
REVERB button.
13. Chorus effect
The Chorus reproduces an electronically
obtained modulating effect, which may be
activated or deactivated by pressing the
CHORUS button.
SPLIT
MULTI DISPLAY
SPLIT
MULTI DISPLAY
CHORUS
MULTI DISPLAY
MULTI DISPLAY
REVERB