• CONTROL PANEL
R 301 Dice / R 301 Dice Ultra
Red switch
=
Off switch
Green switch =
On switch
Black switch =
Pulse control
ASSEMBLY
• BOWL ATTACHMENT
1) With the motor base
facing you, place the
bowl onto the motor
base with the magnetic
bar/handle toward the
front. Turn the bowl just
off-center and to the left
as you lower it onto the
base.
2) Then, turn it back to
the right. The magnet
bar/handle should come
to a stop at the front of
the motor base. The
bowl, when properly
assembled should be
just off and level with
the top surface of the
motor base.
6
INTRODUCTION TO
YOUR NEW R 301 Dice •
R 301 Dice Ultra Series “D”
The R 301 Dice / R 301 Dice Ultra is a versatile
machine designed to meet your professional needs.
It can perform a number of tasks, as well as save
much in time and labor.
This food processor consists of a bowl assembly
and vegetable preparation attachment. The 3.5
quart bowl is used for chopping, grinding, pureeing,
blending, mixing, and kneading of ingredients
required in most every recipe.
A wide range of cutting plates are available for use
with the vegetable preparation attachment. Cutting
plates are available for slicing, waved slicing,
grating, pulping, and julienne.
A citrus juicer accessory is also available.
Its numerous functions will open the door to a whole
new culinary world.
Thanks to its simple design, all components
requiring frequent handling for maintenance or
cleaning can be easily assembled or removed.
All users should read this operation manual before
operating the machine.
SWITCHING ON
THE MACHINE
• ADVICE ON ELECTRICAL CONNECTIONS
Before plugging in, check that your power supply
corresponds to that indicated on the machine’s
serial number plate.
3) Place the blade onto
the motor shaft. Rotate
the blade until it drops
into place. The bottom
blade should be level
with and just off the
bottom of the bowl.
4) Note the plastic tab
on the bowl lid. Place
the lid on the bowl with
the tab turned to the
front and slightly to the
left of the bowl handle;
then, turn the lid back to
the right until it comes to
a stop with the tab over
the bowl handle.
The device is now ready for use.
• CITRUS-JUICER ATTACHMENT
1) and 2) Operate the same way for the bowl
attachment.
3) Place the basket on
the specific bowl delive-
red with the citrus juicer
attachments and rotate
until it clicks. You will
notice that the magnet of
the basket is directly
above the magnetic bar / handle.
4) Place the cone onto the motor shaft and it should
drop into place just off the surface of the basket.
W A R N I N G
This appliance must be plugged into an
earthed socket (risk of electrocution).
