Robot Coupe A Series, Manual

Page: 2 / 27

20/11/2017
WARNING:
In order to limit accidents such as electric shocks, personal injury or fire, and in order to limit material damage due to misuse of the appliance,
please read these instructions carefully and follow them strictly. Reading the operating instructions will help you get to know your appliance and enable
you to use the equipment correctly. The operation manual should be kept within easy access to all users for reference and should be read completely by all
first time users of the machine. Our equipment is designed for professional use and must not be used by children under any circumstances.
IMPORTANT WARNING
UNPACKING
• Carefully remove the equipment from the
packaging and take out all the boxes or packets
containing attachments or specific items.
• CAUTION: Some of the parts are very sharp, e.g.
cutting blade. Always handle with safety in mind.
INSTALLATION
• The machine must be operated on a clean
sturdy counter or table. Keep the area around and
under the machine clear to allow air circulation.
Otherwise, the motor can overheat.
CONNECTION
• The Blixer
®
5 V.V. Series A, Blixer
®
6 V.V. Series A
must always be connected to a grounded outlet with
Ground Fault Circuit Interrupter (GFCI) protection
device.
HANDLING
• Always take care when handling the blades, as
they are extremely sharp.
ASSEMBLY PROCEDURES
• Follow the various assembly procedures carefully
(see page 6) and make sure that all the attachments
are correctly positioned.
USE
• The machine must not be modified in any way
from its original configuration.
• Operating times of 5 minutes or longer can
cause processed food to increase to temperatures
above 125° F (52° C).
• Never tamper with, or defeat the purpose of the
locking and safety systems.
• Do not put nonfood objects in the bowl.
• Do not leave the machine running unattended.
• The machine must be operated and stored in
a location not subject to water drips or spray or
explosive vapors.
• Should the machine malfunction or should any
part be damaged, it must not be operated until
it is repaired by a qualified technician using only
genuine Robot Coupe repair parts.
• Failure to follow these operating instructions
or attempts to operate the machine outside its
design limits may create a hazardous condition
that could damage the machine and/or injure
users. Special attention should be given to the use
of the operation controls and safety features.
• The unit is equipped with a thermal overload
circuit-breaker. If the unit overheats due to an
overload condition, it will automatically shut off.
After cooling a few minutes the thermal overload
circuit-breaker may be reset. Press the reset button
located on the bottom left front of the unit.
CLEANING
• Always disconnect the machine from the power
outlet when not in use and when cleaning or
servicing the unit.
• Always clean the machine and attachments at
the end of each use.
• Never place the motor unit in water.
• For parts made of aluminum alloys, use cleaning
detergents suitable for aluminum.
• For plastic parts, do not use detergents that are
too alkaline (i.e., containing too much caustic soda
or ammonia…).
• Robot Coupe can in no way be held responsible
for the user’s failure to follow the basic rules of
cleaning and maintenance.
MAINTENANCE
• Always disconnect the machine from the power
outlet before servicing the unit.
• Check the seals regularly and ensure that the
safety devices are in good working order.
• NOTICE: Never operate the appliance if the
power cord or plug has been damaged.
• If the machine fails to operate as described in
this manual, or if the machine malfunctions in any
way, remove the machine from use and have it
serviced. Additionally, discard all food processed
at the time of the malfunction.
• Contact your local Authorized Service Agency if
something appears to be wrong.