3. Run the application and select two Cubes on the screen.
4. Select the robot to connect.
(e.g. AUTO CAR)
5. Assemble it by referring the development view or the assembly
flow chart.
The assembly flow chart
is at the last of the manual,
and there are the assembly
sequences of
all
the robots
that can be assembled
in
this
series
.
The shape of the upper
figure should be assembled
to fit the star and square,
so that the front and the
rear are not changed when
operating with
a
joystick
.
Connection to Smartphone
Connection to Smartphone
Direction
PINGPONG
G SERIES
G
