2
shall be reproduced in any form without the prior written consent or authorization
of DJI. The final interpretation right of this disclaimer is reserved by DJI.
This document and all other collateral documents are subject to change at
the sole discretion of DJI. For up to date product information, visit http://www.
robomaster.com and click on the product page for this product.
Warning
1. Visit the RoboMaster official website and download the RoboMaster Development
Board Type C User Manual before use. Read and understand the whole manual
and strictly follow the instructions in the manual when using the Board Type C.
2. Connect the cables correctly by following the instructions in the RoboMaster
Development Board Type C User Manual. Otherwise, the cables or the Board
Type C may be seriously damaged.
3. Make sure there are no short-circuits and all the cables are in good condition.
DO NOT use cables that have been damaged in any way.
4. Make sure to use the product in strict accordance with the specifications listed
in this document, including those related to voltage and temperature. Failure to
do so may reduce the product service life or even lead to permanent damage.
5. To avoid physical damage, make sure to assemble the Board Type C correctly.
6. If you detect any flames, smoke, strange smells, or other abnormalities,
disconnect the Board Type C from the power source immediately.
7. DO NOT open the silicone case. Otherwise, foreign objects may fall inside and
the performance of the Development Board Type C may be negatively affected.
Introduction
Designed to work with the RoboMaster and other products, the compact
Development Board Type C uses a high-performance STM32 microcontroller chip
and supports a wide voltage input. The highly integrable Board Type C boasts
an expansion interface, communication interface and high precision IMU sensors
and features an anti-reverse connection and anti-overvoltage protection. The
Board Type C can provide rich routines and can be widely used in fields such
as robotics competitions, research and education, and automation equipment.
