6
Maintenance and cleaning
DO NOT use excessive water while cleaning!
ALWAYS unplug the machine from the mains
before cleaning!
DO NOT use sharp tools or abrasives!
Wait until machine is cool before cleaning!
The purpose of maintenance and cleaning is to keep machine in good condi-
tion during all the lifetime and to meet safety requirements. Recommended
cleaning schedule:
Outer surface cleaning
every day
Chamber cleaning
every day
Sifter cleaning
once a week
Sifter rollers cleaning
every two weeks
Feeder cleaning
every month
6.1
Outer surface cleaning
Clean outer surfaces of the machine with a soft and clean cloth slightly
damped with soap solution. Wipe dry immediately.
6.2
Chamber cleaning
It is necessary to clean the chamber of husk and dust once a day. To clean
the chamber, unfasten the latches which hold the door, and pull it out.
After that, remove husk and debris from the chamber. It is handy to use a
vacuum cleaner for this operation. After cleaning, place the door back and
fasten up the latches. During long time operation, certain amount of corn
15
