http://www.robokits.co.in
http://www.robokitsworld.com
Page 9
Track-Bot PS2 Wireless Remote Controlled Robot Assembly Guide
Step 9
Now connect the battery to
circuit with help of given
connector.
The
battery
should
be
connected
to
circuit in such a way that
GND terminal is connected to
Black wire.
Note : Connecting the battery
in reverse will damage the
circuit permanently so take
care
every
time
when
connecting battery.
After powering up Rx led on
receiver will start blinking.
Now
power
up
the
transmitter and the RX led
should be continuously on.
This confirms that the remote
is working. If not turn off
transmitter and power on
again until led is steady.
Step 10
Now connect motors to M1
and M2 terminals.
After
connecting
motors
check for actions pressing
buttons on transmitter.
Note that in DC motors you
can swap wires to change
directions. Check for forward
backward,
left
and
right
action. Change the wires if
robot is doing wrong action
on key press.
