16
GB
Mounting the hood body
Connections
DUCTED VERSION AIR EXHAUST SYSTEM
When installing the ducted version, connect the hood to the chimney using either a flexible or rigid
pipe ø 150 or 120 mm, the choice of which is left to the installer.
• Before attaching the hood body, tighten the
two screws
Vr
located on the hood body
mounting points
• Hook the hood body onto the screws
12r
(4,2 x 12,7).
• Fully tighten support screws
12r
(4,2 x
12,7).
• Adjust screws
Vr
to level the hood body
• To install a ø 120 mm air exhaust connection,
insert the reducer flange
9
on the hood body
outlet.
• Fix the pipe in position using sufficient pipe
clamps (not supplied).
• Remove any activated charcoal filters.
12r
Vr
ø 150
9
ø 120
Summary of Contents for ORELIA S
Page 1: ...Orelia S FR Manuel d Instructions 2 GB Instruction Manual 11...
Page 20: ......
