ROBLIN Graphic, Instruction Manual, Page: 19 / 56

EN
1
9
19
USE
Control panel
Button Function Display
A Turns the suction motor on and off at the
last speed used. Displays the speed setting
B Decreases the operating speed.
C Increases the operating speed.
D Activates intensive speed from any other
speed, even with the
motor stopped. Inten-
sive speed is timed to
run for 10 minutes, af-
ter which the system
will return to the speed
that was set previously.
Suitable to deal with
the highest level of
cooking fumes.
Displays HI and the spot at
the bottom right flashes once
a second.
E Starts the motor at a speed that allows re-
circulation of 100 m3/h for 10 minutes in
every hour; after which the motor stops.
When the filters alarm is triggered, the
alarm can be reset by pressing and holding
this button for approximately 3 seconds.
These indications are only visible when the
motor is turned off.
Displays 24 and the spot at
the bottom right flashes,
while the motor is running.
When the procedure has been
completed, the indication
previously displayed will
turn off:
FF indicates the need to
wash the metal grease filters.
The alarm is triggered after
the Hood has been operating
for 100 actual working
hours.
EF indicates the need to
change the activated char-
coal filters, and also to wash
the metal grease filters. The
alarm is triggered after the
Hood has been operating for
200 actual working hours.
F Activates automatic shutdown with a 30'
delay. Suitable to complete elimination of
residual odours. It can be activated from
any position, and is deactivated by pressing
the button or turning the motor off. Alternately displays the
working speed and the time
remaining until the hood is
turned off. The spot at the
bottom right flashes.
G Turns the lighting system on and off.
H Turns the low intensity lighting system.
A
B
C
D
E
F
G
H