Setup Sequel
16.
Press the C-list (Saw list)
Press the numerical field and enter
the wanted measures.
Press the number of the wanted
position (1). The number will appear
on the screen (2). Only then you can
push START and will the fence go to
its position.
Attention: when the measure is
smaller than 150mm, you are in the
safety zone. In this case you have to
push the warning triangle
continuously to reach the position.
To leave the screen, push ENTER
Password logout. Confirm with
ENTER
The current position is now correct
Press MENU
How to use the saw list
Summary of Contents for NZ 3200 - AXIS ERGO
Page 19: ...Assembly NZ Axis Ergo Sequel 19 ...