14
Operating Instructions
•
Place each item of laundry in separately.
•
Check that no items of laundry are trapped between the rubber seal and the door.
•
Make sure that the door is completely closed or the machine won’t start the washing operation.
Choice of Detergent and Placing into the Machine
The amount of detergent to use will depend on the dirtiness of your clothes and the hardness of your water supply;
guidelines will be on the packaging of your detergent.
•
If your clothes are only slightly soiled, do not do a pre-wash. Put a small amount of detergent (as specified by
the manufacturer) into compartment II of the detergent drawer.
•
If your clothes are excessively soiled, select a program with pre-wash and put ¼ of the detergent to be used
into compartment I of the detergent drawer and the rest in compartment II.
•
Use detergents produced for automatic washing machines in your machine. Follow the instructions on the
detergent packaging when determining the amount of detergent to use for your laundry.
•
The higher the degree of hardness of the water, the more detergent you will need.
•
The amount of the detergent you will use will increase as the amount of your laundry increases.
•
Put the softener in the softener compartment in the detergent drawer. Do not exceed the MAX level,
otherwise the softener may flow into the washing water.
•
Softeners with high density must be thinned before being put in the drawer. High-density softener will clog the
flush and block the flow of the softener.
•
You can use liquid detergent in all programs without pre-washing. Insert the liquid detergent apparatus in
compartment II of the detergent drawer and adjust the liquid detergent amount (follow the instructions on the
liquid detergent packaging). Do not exceed the MAX level.
Additional Functions
To allow you to get the best washing results possible, your machine offers the following additional functions to
complement the selected program. To select an additional function before starting a program:
•
Press the button on the Control Panel below the symbol of the additional function you wish to select.
•
If the symbol of the additional function flashes continuously, the function has been activated.
•
If the symbol of the additional function blinks, the function has not been selected.
•
Reason for non-activation:
•
The additional function is not compatible with the selected washing program.
