4
Operating Instructions
Placement
Before using the freezer, remove all packaging materials including bottom cushions and foam pads and
tapes inside the freezer. Tear off the protective fil on the door and the freezer body.
The freezer should be placed in a well-ventilated indoor area; the ground should be flat and sturdy.
Keep out of direct heat and sunlight. Do not place the freezer in moist or watery places to prevent rust or
reduction of the insulation effectiveness.
There must be at least 70cm of free space above the freezer and at least 20cm of free space on the sides
and back of the freezer.
Do not connect the freezer to the power supply until 30 minutes after you have placed it in position.
Run the freezer for 2-3 hours before loading foodstuffs into it – run the freezer for 4 hours prior to loading
with foodstuffs if there is a high ambient temperature.
Temperature Control (for model VCF142 and VCF295)
When you connect the freezer to the power supply, the “Power” indicator will light up.
The “Run” indicator will light up when the compressor is running.
The “Alarm” indicator will light up when the interior temperature of the freezer is too high.
The temperature of the freezer is adjusted via the thermostat knob. The numbers “1, 2, 3, 4, 5, 6” do not refer to
specific temperatures; the higher the setting, the cooler the freezer interior will be and vice versa. The user can
choose the right temperature according to their needs.
Choosing the “Off” setting will cause the freezer to turn off.
