ROBINHOOD Slimline 600 Installation Instruction Download Page 2

103767 Issue A
ECN:2557

D U C T I N G   O P T I O N S

REAR DUCTED

RECIRCULATING

TOP DUCTED

THROUGH

ROOF

FLEXIBLE DUCT

FOR SIDE

DUCTING

NOTE: when ducting

Exhaust air must not be discharged into any chimney or flue which may carry combustion
products from other sources. In addition, exhaust air must not be discharged into a wall
cavity, unless designed for the purpose.

O P E R A T I O N   &   C L E A N I N G

OPERATION

After your Rangehood is fixed in position:

1. Check that the light and the diffuser are in place.

2. See that the filters are correctly positioned.

3. If exhaust cover is supplied ensure it is fitted in a ducted mode.

Discard exhaust cover if a recirculating mode is being used.

Exhaust covers may be purchased from your rangehood supplier.

4. Plug into 230-240V outlet. Keep cord clear of stove elements or hot utensils. 

Permanent wiring to house supply, or modifications to plug or wire should be 
carried out by a registered electrician.

CLEANING

1. Disconnect the Rangehood from power supply.

2. Wash aluminium filters every 2 or 3 months, depending on usage, with hot

soapy water or in the dishwasher.

3. Charcoal filters are disposable items and should be replaced when cleaning

the rangehood.

4. Clean the external and internal surfaces including the fan blades, using a

damp cloth and mild detergent. Do not use any powder or abrasive cleaners.

REMOVE

EXHAUST COVER

DO NOT REMOVE

EXHAUST COVER

DO NOT REMOVE EXHAUST COVER

DO NOT REMOVE

EXHAUST COVER

1. Disconnect the Rangehood from power supply.
2. Insert small screwdriver or slim knife as shown,

     ease catch to side and slip out the diffuser.
3. Replace lamp (40 watt max).
4. Slide diffuser back into aperture and ‘click’ into

     place.

L A M P   R E P L A C E M E N T

PARTS AND SERVICE

For Accessories, Parts or Services, please contact your local supplier

or approved service agent.   (Refer to the Warranty Certificate)

WARNING

• This appliance is not intended for use by young children or  

infirm persons without supervision.

•Young children should be supervised to ensure that they do 

not play with the appliance.

• There shall be adequate ventilation of the room when the 

rangehood is used at the same time as appliances burning gas

or other fuels.

• You must read the details concerning the method and frequency

of cleaning.

• There is a fire risk if cleaning is not carried out in accordance

with the instructions.

• Do not flambé under the rangehood.

• Exhaust air must not be discharged into an existing flue which

is used for exhausting fumes from appliances burning gas or 

other fuels.

• The minimum distance between the hob surface and the lowest

part of the rangehood is 600mm. This distance shall be at 

least 650mm, if the rangehood is installed over a gas hob.

(We recommend 700mm)

•Attention should be given to ensure that any applicable

  regulations concerning the discharge of exhaust air is fulfilled.

• If the supply cord of this equipment is damaged, it must only 

be replaced by the manufacturer or its service agent or similarly

 qualified person in order to avoid a hazard.

Electrical Rating:
280W (1.16A)
Max. at 230-240V 50Hz

MANUFACTURED IN NEW ZEALAND BY:

ROBINSON INDUSTRIES LIMITED

P.O. BOX 51 201, PAKURANGA,AUCKLAND, N.Z.

TEL: +

64 9 272 5129 • 

FAX: +

64 9 272 5148

ISO9001 Certified

RECOMMENDED UNIDUCT DUCTING

SYSTEMS FOR RANGEHOODS

Reviews: