4
Installation Instructions
Exhaust
Fix the one-way valve to the air outlet of the rangehood, and then attach the exhaust
pipe (needs to be purchased separately) to the one-way valve.
Chimney Installation
•
Put the upper chimney into lower chimney. Then pulling the upper chimney upwards. Adjust to reach the
required height.
•
Sliding the chimney to adjust the chimney height. When the height you required is reached, then hang the
fixing hole to the fixing screws as showed in below pictures.
•
Drill 2×8mm holes to accommodate the plate II. Screw and tighten the plate II onto the wall with 2 screws
provided. Assembly the chimney onto the unit and fix it with 2 screws.
Warning
:
Failure to install the screws or fixing device in accordance with these instructions may result in electrical hazards.
