8
Cleaning and Maintenance
Caution:
•
Before maintenance or cleaning is carried out, the cooker hood should be disconnected from the mains power
supply. Ensure that the cooker hood is switched off at the wall socket and the plug removed.
•
External surfaces are susceptible to scratches and abrasions, so follow the cleaning instructions to ensure the
best possible result is achieved without damage.
•
Cleaning and maintenance should be carried out with the appliance cold especially when cleaning. Avoid
leaving alkaline or acid substances (lemon juice, vinegar etc.) on the surfaces.
•
The stainless steel must be cleaned regularly (e.g., Weekly) to ensure a long‐life expectancy. Dry with a clean,
soft cloth. A specialized stainless steel cleaning fluid may be used.
•
Ensure that wiping is done along with the grain of the stainless steel to prevent any unsightly crisscross
scratching patterns from appearing.
•
The inlay control panel can be cleaned using warm soapy water. Ensure the cloth is clean and well wrung
before cleaning. Use a dry soft cloth to remove any excess moisture left after cleaning.
•
Using neutral detergents and avoid using harsh cleaning chemicals, strong household detergents or products
containing abrasives, as this will affect the appearance of the appliance and potentially remove any printing of
artwork on the control panel and will void manufactures warrantee.
GREASE MESH FILTERS
The mesh filters can be cleaned by hand. Soak them for about 3 minutes in water with a mild detergent and then brush
it gently with a soft brush. Do not apply too much pressure to avoid any damage to it. (Leave to dry naturally out of
direct sun light) Filters should be washed separately to crockery and kitchen utensils. It is advisable not to use rinse aid.
INSTALLING GREASE MESH FILTERS
To install filters for the following four steps:
•
Angle the filter into the slots at the back of the hood.
•
Push the button on the handle of the filter.
•
Release the handle once the filter fits into a resting position.
•
Repeat to install all filters.
