5
Installation Instructions
Do not kink or protract the drain hose.
Position drain hose properly, otherwise damage might result of water leakage.
If drain hose is too long, do not force it into washing machine as it will cause
abnormal noises.
There are two ways to place the end of drain hose:
1. For lower drain system
2. For lower drain system
Levelling the washing machine
The lock nuts on all four feet must be screwed tightly against the housing.
1.
Check if the legs are closely attached to the cabinet. If not, please turn them to their original
positions tighten the nuts.
2.
Check alignment of the product with a spirit level and if required, correct.
3.
Loosen the lock nut and turn the feet until it closely contacts with the floor.
4.
After being locked properly, press four corners again to make sure that they has been adjusted
properly.
Warning!
Warning!
