Specialty drying function
1.
Instruction to the [Delay
l
drying procedure
To delay the drying programme from O hour to 24 hours. The delay time means the programme
will start after x hours. When the delay programme starts, the time starts to decrease on the
display and the 0 icon blinks.
Steps in details
(1).Load your laundry and make sure the machine door is closed.
(2).Press the [On/Off] button,then to turn the programme selector knob and select a desired
programme.
(3).You can select the [Anti-Creasel or [Signall functions according to your need.
(4).To press the [Delay] key.
(5).Continue to press the [Delay
l
to select the delay time.
(6).After the [Start/Pause
l
key is pushed, the dryer is at the run condition. The drying procedure
will be automatically performed when the delay time is over.
(7).lf you push the [Start/Pause] button again, the delay function will be paused.
(B).If you want to cancel the "Delay" function, please press the [On/Off] button.
2.
Instruction of the [Time
l
function
When the time programme is selected, the [Time] button can be used to adjust the drying time in
10 min. steps. The maximum time is 150 min.
3.
Instruction of the [Intensity
l
function
Used to adjust the dryness level of the laundry. The level has four grades
*
*.,:,. *.
The drying time increases 3 minutes in every grade.
(1).The intensity function can be activated only before the programme start.
(2).Press the [Intensity
l
button repeatedly to select the drying time.
(3).Except the [Cotton Iron] [Delicate] [Synthetic Iron]
[Wool] [Time] , all other
programmes can
h
ave the [Intensity
l
function applied.
4.
Instruction of the [My Cycle
l
function
Used to define and save your favorite proragmmes that are used frequently.
(1).Use the programme selector to select the required programme and other drying functions.
(2).Press and hold the [Intensity
l
button for 3 seconds until the display flashes and the required
programme has been saved.
(3).Turn the programme selector to the [My Cycle
l
position, you can start your favorite proragmme.
If you want to change the [My Cycle] settings, repeat the steps (1) and (2).
5.
Instruction of the [Lampl
The lamp inside the drum will come on for 3 minutes when the button is pressed or 1 minute when the
door is opened.
6.
[Signal]
Turning the buzzer on or off. The buzzer is automatically set to "on". Press the [signal]
key to change.
(1)
D
ryer will sound if extra functions are selected.
(2)
If t
h
e dryer is running and the function knob is rotated the dryer will sound to remind
the user this is not a valid operation.
(3)
W
h
en the dry cycle is complete the buzzer will sound.
7.
Instruction of the [Anti-Crease
l
function
At the end of the drying cycle, the anti-crease operation time is 30 minutes (default )
or 120 minutes (selected).
The [Anti-Crease] light shall illuminate when the anti-crease function is selected. This function
prevents the laundry from creases. The laundry can be removed during the anti-crease phase. Except
[Cooll , [Refresh] and [Wooll , all the other programmes have this function.
8.
Instruction of the [Child Lock] feature
(1).This machine incorporates a special child safety lock, which can prevent children from carelessly
pressing keys.
(2).When t
h
e dryer is in operation, press the [anti-crease] and [signal] buttons at the same time for
3 seconds to engage c
h
ild lock. When c
h
ild lock is set the display will show "{,-9-" iicon and no other
keys except [on/off] can be used. To remove child lock press the [anti-crease] and [signal]
buttons at the same time for 3 seconds.
14
r:;;oRobinhood
15
r:;;oRobinhood
